Basic Info.
After-sales Service
24 Hours Online
Type
Universal Testing Machine
Power Source
AC 380V 50Hz
Structure Mode
an Integral Structure with Upper and Lower Cabinet
Temperature Range
-40ºC — +150ºC
Temperature Fluctuation
±0.3ºC
Heating Rate
Average 1~3°c/Minute (Non-Linear No-Load)
Cooling Rate
Average 1.0°c/Min Full Rang
Temperature Uniformity
≤±2ºC(at No Load, Constant State)
Observation Window
Three-Layer Vacuum Tempered Glass
Cooling Mode
Air Cooling / Water Cooling (Optional)
Compressor
Tecumseh (France)
Transport Package
Each Set Protected with Resin Fiber and PP Film, T
Specification
Test Space 600x850x800(customizable)
Product Description
Double Deck High and Low Temperature Climatic Test Chamber for Battery Cell Testing
Features:
1. Professional explosion-proof pressure relief design.
2. Professional high temperature smoke exhaust design.
3. Rich temperature monitoring and alarm mode.
4. Insulated and heat-resistant inner wall and partition.
5. Water-based and gas fire extinguishing firefighting linkage experience.
6. Design and guidance of sample layout and wiring.
7. Spray cooling water supply and drainage design.
8. Long-term operation of energy saving and consumption reduction design.
9. Consideration of integration with charging and discharging modules.
10. Better temperature uniformity.
11. Consistent low wind speed conditions.Application
Double-deck High Low Temperature Test Chamber provides a constant high and low temperature environment condition ranges from -40°C to 150°C (Available for customized design). It is widely used to test the thermal performance of various products and components. The two test cabinets work independently, providing high efficiency and performance for laboratory testing. Furthermore, the additional explosion-proof function enables this test chamber to be combined with the charge-discharge test, providing a temperature environment for various battery performance testing.
Features
- PLC Control, programmable, remote computer control
- Heating System
- Refrigeration System
- Forced Internal Circulate System
- Fume Exhaust System
- Explosion-proof System
Standards
- IEC 60068-2-1:2007: Low temperature testing
- IEC 60068-2-2:2007: High temperature testing
- GJB 150.3-1986: High temperature testing
- GJB 150.4-1986: Low temperature testing
- GB/T 2423.1-2008: Low temperature testing
- GB/T 2423.2-2008: High temperature testing
- GB/T 31485-2015: Safety requirements and test methods for electric vehicles' power batteries
Performance parameters| Model | BTL-D2-252 | BTL-D2-288 | BTL-D2-360 |
| Single Cabinet Inner Dimension | W600 X D700 X H600 MM | W800 X D600 X H600 MM | W1000 X D600 X H600 MM |
| External Dimension | W1300 X D1800 X H1950 MM | W1500*H1950*D1700 MM | W1740*H1900*D2100 MM |
| Structure Mode | An integral structure with upper and lower cabinets. |
| Temperature Range | -40ºC - +150ºC |
| Temperature Fluctuation | ±0.3ºC |
| Heating Rate | Average 1~3°C/minute (non-linear no-load) |
| Cooling Rate | Average 1.0°C/min Full rang (non-linear no-load) |
| Temperature Uniformity | ≤±2ºC(at no load, constant state) |
| Observation Window | Three-layer vacuum tempered glass |
| Test Terminal | 12 sets of terminals are connected to the test cabinet inside and outside of the chamber |
| Cooling Mode | Air cooling / Water cooling (Optional) |
| Compressor | Tecumseh (France) |
| Controlling Mode | Touch screen programmable control PLC, with USB interface, with RS485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition |
| Internal Chamber Material | 1.0MM thick SUS304# stainless steel with mirror finish, sprayed with T eflon insulation |
| External Chamber Material | 1.2 MM thick Galvanized sheet, dusting pained with high temperature plasticized coating. |
| Power Supply | AC380V 50HZ 12KW/14KW/16KW |
| Safety Protection | Automatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc. |
| Extension Function | Provide communication protocol, able to accompanied use with charge and discharge machine |
Use common sense of high and low temperature test chamber
- The enclosure of the high and the low test chamber must be grounded during installation. If the high and low temperature test chamber is not grounded, there will be a risk of electric shock in case of leakage.
- Do not run the high and low temperature test chamber before it is installed, and make sure that the installation is reliable before performing the test.
- If heating samples are placed in the test chamber, please use an external power supply for the sample control power supply, do not use the power supply of this test chamber directly.
- The operation of the cabinet will produce a dangerous current, non-professionals should not open the cover of the electric control cabinet.
- If the high and low temperature test chamber is not equipped with humidification function, pay attention to the difference in use and requirements when reading the instructions.
- When the test chamber is running, various motors and fans are started according to instructions under the control of the controller. Do not touch the components that are temporarily in a static state with your hands to prevent the components from starting suddenly and causing personal injury. It is indeed necessary to approach the rotating parts, please cut off the main power switch and ensure that the protective device is in good condition when working at the place.
- It is forbidden to move the test chamber when there is a sample inside, otherwise, the sample may reverse or fall.
- Before use, make sure that the high and low temperature test chamber is fixed, the casters are off the ground to adjust the foot to the ground, otherwise, the test chamber will accidentally move when subjected to the external force.
Established in 2005, Guangdong Bell Experiment Equipment Co., Ltd is specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber,High & Low Temperature Test Chamber, High & low Temperature Testers with Rapid Temperature Change, Walk-In humidity & temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging test chamber, sand and dust testing machine,tension tester, high and low temperature testing machine , servo computer battery crush tester, mechanical vibration testerBattery washing tester ,battery burning tester and other quality testing instruments. Thanks to several decades of R&D efforts,the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.
15+ years experience in test chambers manufacturing, High performance for your projects.
With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, Guangdong Bell Experiment Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards.FAQQ1 : Can you customize the product? A: Yes, we can customize any products according to requirements. Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber/Car Battery Safety Test Chamber also can be customized. Q2 : How to choose the most suitable products? A: Our professional team will give you the best suggestion, just be patiently to tell us the information about the parameters you require.Q3 : Can you arrange installations and commissioning in our lab? A: Firstly, for standard chamber we had 3-5 days commissioning before shipping, you just need link power in your lab, then you can start to operate. Secondly, we had detailed operation manual with chamber , any problems you can find and solve in it. Thirdly, some customized chambers we should install and teach your team to operate .
Address:
No. 11 Wusong 1st Street, Dongcheng Distrct, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters
Management System Certification:
ISO 9000, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Established in 2005, Guangdong Bell Experiment Equipment Co., Ltd is specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber, High & Low Temperature Test Chamber, High & Low Temperature Testers with Rapid Temperature Change, Walk-In humidity & Temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging tester, sand and dust testing machine, tension tester, high and low temperature testing machine, servo computer battery crush tester, mechanical vibration testerBattery washing tester, battery burning tester and other quality testing instruments. Thanks to several decades of R& D efforts, the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.
15+ years experience in test chambers manufacturing, High performance for your projects.
With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, Guangdong Bell Experiment Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards.
){kind=link}